134********
0769-85259330
型号model:41.3反射面透镜38度
产品规格specifiction:41.3*20.0
角度degree:15/24/38/60
匹配LED:COB 夏谱/普瑞/ CREE/三星/西铁城/艾迪生等
材质:PMMA
备注(Note):
(1)透镜材料为PMMA,颜色为透明。
(Lens material is PMMA,and color is transparent.
(2)工作时控制的温度变化范围:-40℃~+ 80℃
(Operating Temperature range -40℃~ + 80℃ )
(3)贮存温度:0℃~ + 40℃
(Storage Temperature range 0℃~ + 40℃)
(4)如果必须清洗透镜请用少量水和柔软的布(无尘纸)擦拭。
(If necessary, clean lenses with mild soap, water and soft cloth.)
(5)禁止用工业溶剂清洗透镜,例如酒精。
(Never use any commercial cleaning solvents on lenses, like alcohol.)
(6)工作环境时透镜的温度控制在-40℃~+80℃
(Lens operating Temperature range -40℃to + 80℃.)
(7)贮存环境要求,温度: 0℃~40℃, 湿度:30%~95%.
(Alternatively the following environment is recommended: Storage temperature:
0℃to 40℃, Humidity:30% to 95% HR max.)
(8)透镜具有导光和聚光功能,由透明材料制成,污染后可直接影响其功能,于是在未使用
请勿打开包装,预防灰尘等污染。
(This kind of lens can make the lighting more concentrated , and it’s made from the transparent material, The functions will be affected once they were polluted, so please do not open the packages until you use them , in case of the dust and other pollutions.)
(9)避免阳光直射和其他带有紫外线的射线照射,易产生老化、变色、裂变等不良效果。
(Please Avoid the lens contacting with the sunlight and other ultraviolet radiations directly, it’s very easy to produce the bad effects , such as aging, discoloration,
fission and so on .)
(10)请在安装透镜时戴手套,透镜表面的磨损会影响其出光效果。
(Please handle or install lens with wearing gloves, skin oils may damage lens optical characteristic.)
(11)禁止用酸性或碱性溶剂接触产品,易产生化学反应。
(Please prohibit the acidic or alkaline solvent contacting with the lens directly, or the chemical reaction will be happened very easily.)
阿拉丁网上照明展览会