深圳迈睿智能科技有限公司

普通会员展厅
深圳迈睿智能科技有限公司,成立于2011年,是一家专业从事微波传感器研发、制造及销售的高新技术企业。创新的产品理念、过硬的产品品质,“Merrytek”已成为照明智能传感领域的知名品牌。迈睿科技拥有超过50人的研发团队,拥有350余项专利。国际专利技术5.8GHz微波存在传感器用于移动、微动、呼吸信号等生物探测,解锁了微波传感用于智能家居、智慧建筑、智慧养老、安防监控等多个领域的应用可能。
18
粉丝数
39
总内容量
6684
总阅读量
0
关注
联系人:黄先生
手机:15013527633
模式:生产厂家/经销商
地区: 广东 深圳市
首页

恒流PWM调光LED电源ML50C-PV

  • 品牌 Merrytek
分享到:

联系人

黄先生

15013527633

Constant Voltage Dimmable LED Driver 1-10V Multi Output Current , IP20

Description:

1, Multi-output can be selectable via DIP switch. Output current: 350mA to 1050mA, output voltage:12Vdc and 24Vdc.

2, Dimmable LED driver with primary PUSH, secondary PUSH and 1-10V dimming interface.

3, Jumper design for switching different dimming modes, it is very convenient to select suitable dimming function as you required.

4, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.

5, Synchronization: thanks to the MCU programme, up to 50pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch.

6, Maximum length of the cable, from switch to last driver is 20m.

7, Factory setting: 100% dimming level and 350mA output.

8, Reset the LED diver easily by a jumper.

9, Press-in terminals in primary and secondary side, easy assembly.

10, Protection: Short circuit / Over voltage / Over temperature.

11, Long life span 50,000h, 5 years guaranty.

Applications:

For LED panel light, LED down light, led strip, led tube etc…

Dimming Operation:

A) PUSH Dim

Short push (<0.1sec): Ignore, to avoid reaction on AC spike.

Short push (0.1~1sec): Switch on or switch off.

Long push (>1sec): Dimming up or down, dimming level automatically stops at minimum or maximum value.

B) 1-10V Dim

Using the push dimming will make 1-10V dimming inactivated. The driver has to be reset to active the 1-10V dimming function again.

Synchronization:

For the resynchronization to work correctly when more than one driver is connected to the same push button, follow steps of below after the drivers are connected:

A) Press push button for more than one second, followed by a short push (<1s), now, led light switches off.

B) Do a long push, the system will be resynchronized.

Specifications