独具尖端科，采用智能手机芯片ARM方案，带有外置储存SD卡，具有高记忆容量、快速数据传输率、极大的移动灵活性以及很好的安全性，让你发挥无穷想象力。

We acquire high technology and adopt intelligent chip ARM project with outlaying SD card which has high memory capacity, fast data transfer rate,great moving flexibility and excellent safety, meeting your endless imagination. 

       内置FB4控制硬件，通过以太网连接，方便使用专业软件进行远距离激光效果编程，更加便捷的调试户外激光工程的整体效果。

The built-in Pangolin FB4 control system can control the laser effect at a longer distance through the connection of the network cable, and more conveniently regulate the overall effect of outdoor laser engineering.

     当图案输出小于±1.5时，能在0.1秒内切断激光光路。确保不出现激光单点。配合，具备1T高速运算智能单片机芯片，通过复杂的多维运算比较，智能判断激光束的安全状况，当图案输出小于±1.5°时，就智能关断激光的激发信号。双重保护，双重安全。

When the image outputs less than +/-1.5°, it can turn off the laser light path to make sure not appear laser light spot. With 1T high velocity intelligent chip,through complex arithmetic comparison, it can judge the security of laser beam. When the mage outputs less than +/-1.5° , it can turn off the laser signal, double protection,double security.

独立三层式设计 

Isolated three-layer design

      全新精密紧凑机身设计，独立三层式设计，完美将激光光路、电路控制及散热风路独立而分，激光器合光层，硅胶密封，防尘，防水，防烟油。

Totally new design of precise compact design, independent three layers design, perfectly separating laser light path, circuit control and heat radiation. Laser light mixing layer, silica gel sealing, dust-proof, water-proof, oil-proof.

精密三维调节架

Three dimensional adjusting bracket 

       合光方式采用精密三维调节架，确保激光光斑的质量。

Precise three-dimensional adjusting bracket guarantees the quality of laser spot.

超大散热面积

Large heat radiator 

       300cm2 超大散热面积，确保激光器的热能交换。百页窗式进出风口后，内置2对3路高转速散热风扇，一吸一出，最有效的将交换热能带走。

300cm2 for heat radiation to make sure the heat interchange in laser.  Window-shades for ventilating, two sets of high speed heat radiation fan, one for inhaling, one for exhaling, taking away the interchanging heat.

专业户外防雨恒温箱（选配）

Professional outdoor rainproof incubator (optional)

        内设温度和湿度传感器，基于半导体泵浦激光器内部22-23度之间的最佳工作温度，当多方位传感器检测到温度低于18度时，散热风扇停止工作，内部加热丝工作，加热到20度停止工作；当温度高于20度或湿度大于70%时，启动风扇。（参数可根据现场环境手动设定）

Temperature and huity sensor inside, the best working temperature is 22-23°inside of diode-pumped solid-state laser. When sensor detects temperature lower than 18°, the fan will stop work, heater strip will work till the temperature up to 20°; when temperature higher than 20°huity more than 70%, fan will work.(the parameter can be set manually)

效果展示

Product Effects

产品参数

Product parameter