OTI DX 35/220…240/400 D NFC LOPTOTRONIC Intelligent – DEXAL (non-isolated) | Linear constant current LED driver –DimmableProduct family features_Line frequency: 0 Hz | 50 Hz | 60 Hz_Supply voltage: 220…240 V_Constant Lumen Output (CLO)_Monitoring of luminaire operating parameters_Non-isolated driversProduct family benefits_Versatile non-isolated DEXAL LED driver up to 75 W due to flexible output characteristic_Integrated DEXAL Bus power supply for sensors and wireless radios_Simplified luminaire design for wireless lighting control system and sensors_Locking and unlocking of luminaire/driver data_Advanced luminaire/driver data (power, energy, operating hours…) for analytics_Prepared for DiiA Specification Parts -250, -251, -252 and -253_Fully programmable via T4T software (NFC, DALI Interface)_Very high efficiency_Protection against 4 kV burst and 1.5 kV surge voltage (L-N)_Wide operating range up to 600 mAAreas of application_Linear lighting for office, education, industry, storage areas and retail_DEXAL, easy connection to different partner BMS systems_Suitable for "Works with OSRAM DEXAL" partner components_Suitable for luminaires of protection class I

OTI DX 75/220…240/600 D NFC LOPTOTRONIC Intelligent – DEXAL (non-isolated) | Linear constant current LED driver –DimmableProduct family features_Line frequency: 0 Hz | 50 Hz | 60 Hz_Supply voltage: 220…240 V_Constant Lumen Output (CLO)_Monitoring of luminaire operating parameters_Non-isolated driversProduct family benefits_Versatile non-isolated DEXAL LED driver up to 75 W due to flexible output characteristic_Integrated DEXAL Bus power supply for sensors and wireless radios_Simplified luminaire design for wireless lighting control system and sensors_Locking and unlocking of luminaire/driver data_Advanced luminaire/driver data (power, energy, operating hours…) for analytics_Prepared for DiiA Specification Parts -250, -251, -252 and -253_Fully programmable via T4T software (NFC, DALI Interface)_Very high efficiency_Protection against 4 kV burst and 1.5 kV surge voltage (L-N)_Wide operating range up to 600 mAAreas of application_Linear lighting for office, education, industry, storage areas and retail_DEXAL, easy connection to different partner BMS systems_Suitable for "Works with OSRAM DEXAL" partner components_Suitable for luminaires of protection class I

OTi DALI 75/220...240/550 D NFC IND LOPTOTRONIC Intelligent Industry – DALI (non-isolated) | Linear constant current LED driver –DimmableProduct family features_Line frequency: 0 Hz | 50 Hz | 60 Hz_Versatile scope of application due to output power range ofup to 150 W_Supply voltage: 220…240 V_Available with output current range: up to 1,000 mA_Constant Lumen Output (CLO)_Integrated customizable thermal management (DriverGuard)_Non-isolated drivers_DALI-2 certified (Part -101,-102 and -207)Product family benefits_Fully programmable via T4T software (NFC, DALI Interface)_Lifetime: up to 100,000 h (temperature at T c = 75 °C, max. 10 % failure rate)_High light quality: 1…100% amplitude dimming and 1% output ripple current_Wide operating temperature range: -40…+65 °C_High surge protection: up to 4 kV (L-N) / 4 kV (L/N-PE)_Integrated inrush current limiter_Very high efficiency (up to 96%)_Fulfill safety requirement due to overload, overtemperature, Hot Plug protectionVersatile scope of application due to OSRAM DALI Technology:_Easy to use in corridors and restrooms because of three-level Corridor function_Touch DIM application: easy to control via pushbutton or sensor_Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light_Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz,pulsating DC), on/off switchable_Feedback of power consumption and operating hours (Fit for SMART GRID)_Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting_Luminaire information for easy maintenance_Advanced luminaire/driver data (power, energy, operating hours…) for analyticsAreas of application_Linear lighting solutions for industry, storage areas and retail applications_Installation in emergency lighting systems according to IEC 61347-2-13, appendix J_Suitable for installation in emergency lighting systems according to EN 60598-2-22_Suitable for luminaires of protection class I

OTi DALI 35/220…240/400 D LT2 UF LOPTOTRONIC Intelligent Ultraflat – DALI (non-isolated) | Linear constant current LED driver –DimmableProduct family features_Line frequency: 0 Hz | 50 Hz | 60 Hz_Versatile DALI window driver up to 75 W due to flexibleoutput characteristic_Supply voltage: 220…240 V_Available with output current range: up to 700 mA_Direct Ultraflat sensor connection via LEDset (LS/PD LT2 LIUF Sensor)_Use with Ultraflat DALI sensor (LS/PD DALI LI UF Sensor)_Constant Lumen Output (CLO)_Non-isolated drivers_DALI-2 certified (Part -101,-102 and -207)Product family benefits_Ultra-flat housing (11 mm height) for innovative luminaire designs and applications_LEDset interface for direct Ultraflat sensor connection (LS/PD LT2 LI UF sensor)_Fully programmable via T4T software (NFC, DALI Interface)_Lifetime: up to 100,000 h (temperature at T c = 65 °C, max. 10 % failure rate)_High-quality dimming of 1…100 % by amplitude dimming_High quality of light thanks to 1% output ripple current_Very high efficiency_Fulfill safety requirement due to overload, overtemperature, Hot Plug protectionVersatile scope of application due to OSRAM DALI Technology:_Easy to use in corridors and restrooms because of three-level Corridor function_Touch DIM application: easy to control via pushbutton or sensor_Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light_Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz,pulsating DC), on/off switchable_Feedback of power consumption and operating hours (Fit for SMART GRID)_Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting_Luminaire information for easy maintenanceAreas of application_Linear lighting for office, education, industry, storage areas and retail_Installation in emergency lighting systems according to IEC 61347-2-13, appendix J_Suitable for luminaires of protection class I

OTi DALI 75/220…240/700 D LT2 UF LOPTOTRONIC Intelligent Ultraflat – DALI (non-isolated) | Linear constant current LED driver –DimmableProduct family features_Line frequency: 0 Hz | 50 Hz | 60 Hz_Versatile DALI window driver up to 75 W due to flexibleoutput characteristic_Supply voltage: 220…240 V_Available with output current range: up to 700 mA_Direct Ultraflat sensor connection via LEDset (LS/PD LT2 LIUF Sensor)_Use with Ultraflat DALI sensor (LS/PD DALI LI UF Sensor)_Constant Lumen Output (CLO)_Non-isolated drivers_DALI-2 certified (Part -101,-102 and -207)Product family benefits_Ultra-flat housing (11 mm height) for innovative luminaire designs and applications_LEDset interface for direct Ultraflat sensor connection (LS/PD LT2 LI UF sensor)_Fully programmable via T4T software (NFC, DALI Interface)_Lifetime: up to 100,000 h (temperature at T c = 65 °C, max. 10 % failure rate)_High-quality dimming of 1…100 % by amplitude dimming_High quality of light thanks to 1% output ripple current_Very high efficiency_Fulfill safety requirement due to overload, overtemperature, Hot Plug protectionVersatile scope of application due to OSRAM DALI Technology:_Easy to use in corridors and restrooms because of three-level Corridor function_Touch DIM application: easy to control via pushbutton or sensor_Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light_Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz,pulsating DC), on/off switchable_Feedback of power consumption and operating hours (Fit for SMART GRID)_Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting_Luminaire information for easy maintenanceAreas of application_Linear lighting for office, education, industry, storage areas and retail_Installation in emergency lighting systems according to IEC 61347-2-13, appendix J_Suitable for luminaires of protection class I

OTi DALI 35/220…240/400 D NFCFLOPTOTRONIC Intelligent Flat – DALI (non-isolated) | Linear constant current LED driver –DimmableProduct family features_Line frequency: 0 Hz | 50 Hz | 60 Hz_Versatile DALI window driver up to 75 W due to flexibleoutput characteristic_Supply voltage: 220…240 V_Available with output current range: up to 500 mA_DALI-2 certified (Part -101,-102 and -207)_Monitoring of luminaire operating parameters_Constant Lumen Output (CLO)_Non-isolated driversProduct family benefits_Flat housing (16 mm height) for innovative luminaire designs and applications_Fully programmable via software (DALI Interface, NFC)_Advanced luminaire/driver data (power, energy, operating hours…) for analytics_Prepared for DiiA Specification Parts -251, -252 and -253_Lifetime: up to 100,000 h (temperature at T c = 65 °C, max. 10 % failure rate)_High-quality dimming of 1…100 % (amplitude and/or PWM selectable by software)_Higher quality of light thanks to 1% output ripple current_Very high efficiency_Fulfill safety requirement due to overload, overtemperature, Hot Plug protectionAreas of application_Linear lighting for office, education, industry, storage areas and retail_Installation in emergency lighting systems according to IEC 61347-2-13, appendix J_Suitable for luminaires of protection class I