HotSpot Plus LED Driver & Emergency System

The revolutionary HotSpot Plus LED Driver & Emergency System combines the functions of a dimmable, programmable LED driver, emergency LED driver, and replaceable backup battery in a single compact unit. Under normal conditions this all-in-one solution operates as a dimmable, programmable constant current driver; during a power outage the integrated battery automatically activates, providing at least 90 minutes of reliable emergency lighting. Benefits include lower costs, simplified installation, and the ability to bring emergency LED capability to smaller luminaires.

Product Models ?

突破性的HotSpot产品系列将可调光、可编程LED驱动器，应急LED驱动器及可更换备用电池功能集中于一个单体紧凑壳体，实现三功能协同。正常情况下此all-in-one 产品可以做为一个可调光，可编程的恒流驱动使用。此电池集成的产品在断电情况下，自动提供至少90分钟的稳定应急照明。优点包括成本更低、安装更简便，以及能够为较小的灯具带来应急 LED 功能。

Specifications

Specifications

• Driver Type: Constant Current  恒流

• Input Voltage: 100-277VAC (UNV). 45W European model: 220V-240V 输入电压

• Input Frequency: 50/60Hz 输入频率

• Programmable output current: 40/45W models: 250-1400mA. 70W model: 350-2400mA

  可编程输出电流：40/45W 机型: 250-1400mA. 70W 机型: 350-2400mA

• Power Factor: >0.9  功率因数：>0.9

• THD:<20%

• Emergency Power Output: 40W models: 5W for 180 min or 10W for 90 min (user-selectable via switch). 70W model: 3W-7W (Programmable output). 45W European model: 1W-6W (Programmable output; factory set for 3W for 180 min)

  应急输出：40W机型：5W 持续180 分钟 or 10W 持续90分钟 （客户可通过开关自行选择）

  70W机型：3W - 7W （可编程输出）

  45W 欧洲机型：1W-6W (可编程输出; 工厂可设置为3W 持续180分钟)

• Battery Type: LiFePo4  电池种类：磷酸铁锂

• Recharge Time: 12 Hrs  充电时间：12小时

• Dimming Type: 0-10V, 100-1%. 45W European model: 1-10V/Pulse; 0%, 1%-100%

  调光种类：0-10V, 100-1%

  45W欧洲机型：1-10V/Pulse; 0%, 1%-100%        

• RFI/EMI: FCC Part 15A Non-Consumer RFI/EMI: FCC Part 15A 非消费级

• Sound Rating: A   噪音等级：A

• Output Type: Isolated, LED Class 2 输出类型：隔离输出，LED Class 2

• Input Surge Protection: 1kV/3kV  输入浪涌保护：

• Protections: Input current, output short circuit, output open circuit, output to ground short, overload, over temperature

  保护：输入电流，输出短路线路，输出开路线路，输出地线短路，过载保护，过温保护

• Approvals: cURus, CE, RoHS, Damp Locations 潮湿环境适用

• Warranty: 5 years (See specification sheet for details) 质保5年

Product Models 机型

HotSpot Plus

PrintExcelCSVCopy

Guide to Programming

The SmartSet Programming Platform

The HotSpot Plus uses Fulham’s innovative new SmartSet programming platform, which gives the user the power to create the right driver for almost any situation.

The TPSB-100 SmartSet controller allows the user to set a number of parameters. Current, voltage, DMX address, dimming curve, LED group, terminal resistor, and lowest dimming percentage can all be customized to the user’s needs.

The TPSB-100 is powered via a USB cable that can connect either to a PC or wall power with the included adapter. The programming cable then makes a simple contact with connectors on the LED driver to transmit the desired settings. When used with a PC, Fulham’s SmartSet software provides additional programming ability.

HotSpot 搭载了Fulham 创新的新SmartSet 编程平台，可以为用户提供创造适用于几乎所有场景的驱动器能力。

TPSB-100 SmartSet 控制器可以允许用户设定多个参数。电流，电压，DMX地址，调光曲线，LED组，热敏电阻，最低调光百分比，所有这些都可以根据客户的需求去设定。

TPSB-100 使用USB电缆实现供电，可灵活连接PC的USB端口或使用随附适配器接入墙壁电源插座。可编程线束可以简单连接LED驱动器的端子，来直接传输所需的配置参数。当连接PC时，Fulham 的SmartSet软件提供图形化界面，支持高级编程功能。

For additional information, please see the links below: 更多信息，可以直接使用以下链接。

• Video demonstration of the Auto-Program feature using Fulham SmartSet software

• Video demonstration of Dimming Curve settings using Fulham SmartSet software

• Download SmartSet software (5MB) System requirements: 1GHz CPU, 512MB RAM, USB Port 2.0/3.0. Supported Windows OS versions: Windows XP SP2 and above (32 & 64 bit), Windows Vista/Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)

• Download TPSB-100 SmartSet Controller User Manual (less than 1MB)

• Download Programming Instructions and Design Guide (less than 1MB)

• White paper overview of the SmartSet programming system (less than 1MB)

• SmartSet software installation instructions

Software and User Manual  软件和用户手册

SmartSet Programming Software and User Manual

• Download SmartSet software (5MB) System requirements: 1GHz CPU, 512MB RAM, USB Port 2.0/3.0. Supported Windows OS versions: Windows XP SP2 and above (32 & 64 bit), Windows Vista/Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)

• Download TPSB-100 SmartSet Controller User Manual (less than 1MB)

• Download Programming Instructions and Design Guide (less than 1MB)

• SmartSet software installation instructions

Demonstration Videos

• Video demonstration of the Auto-Program feature using Fulham SmartSet software

• Video demonstration of Dimming Curve settings using Fulham SmartSet software

Brochures

• Download HotSpot Plus Lumen Reference Chart

• Download HotSpot Plus brochure

• View Online

• Download HotSpot Plus European Version brochure

Self Diagnostic Instructions  自我检测指导书

• HotSpot Self Diagnostic instructions