HotSpot Constant Power Programmable LED Emergency Solution with DALI V-1

The HotSpot Constant Power Programmable LED Driver provides programmable, constant power emergency output for existing LED modules. Designed for OEMs, the driver automatically detects the capacity of the attached battery to provide the maximum constant output of the battery for a minimum of 90 minutes. Programmable output capability enables longer emergency runtimes when required. Advanced features include self-diagnostics and detailed data logging. Compliant with CEC Title 20 requirements for battery chargers, required for use in California and Oregon. Five different batteries are available to meet varying runtime and form factor requirements. Compatible with Fulham SmartSet Programming Platform and TPSB-100 handheld controller.

HotSpot 恒压，可编程LED应急驱动可以为现有的LED模组提供可编程，恒功率应急输出。专为OEM生产厂商设计。此产品可以自动检测所连接电池的容量，提供最大稳定电池输出至少90分钟的应急照明。可编程的输出设计可以为用户提供所需的更长的应急时间。具备先进的自我诊断系统和详细的记忆存储功能。符合CEC Title 20 所要求的电池充电和加利福尼亚州和俄勒冈州区域的使用要求。5种不同可选电池可以满足不同的应急运行时间和尺寸的要求。兼容Fulham的SmartSet 可编程平台和 TPSB-100 手持控制器。

型号：FHSCP-UNV-10P-L-SD and Batteries

Technical Specifications

• Input Voltage: UNV 120-277VAC   输入电压: 120-277VAC

• Input Frequency: 50/60Hz   输入频率：50/60Hz

• Input Current: 0.06A Max   输入电流：最大0.06A

• Output Voltage: 16-55VDC 输出电压: 16-55VDC

• Output Power: 1-10W  输出功率：1-10W

• Illumination time : Minimum 90 Minutes  照明时间：最小90分钟

• Recharge Time: 24 Hrs   充电时间：24小时

• Communication Mode: DALI V1.0 or Bluetooth w/ supporting Smart Link

  沟通模式：DALI V1.0 或者蓝牙（支持Smart Link）

• Ambient Temperature: 10oC – 55oC   工作环境温度：10度 - 55 度

• Battery Type: LiFePO4 9.6VDC / NiCd 9.6VDC  电池种类：磷酸铁锂 / 镍铬电池

• Battery Recharge Time: LiFePO4: 12 Hours / NiCd: 24 Hours 电池充电时间：磷酸铁锂 12个小时；镍铬电池：24个小时

• RFI/EMI: FCC Part 15A Non-Consumer 非消费级

• Output Type: Class 2  输出等级：Class 2

• Surge Protection: Line-Neutral 2kV, Line & Neutral-Ground 2kV 浪涌保护

• Warranty: 5 Years 质保5年

Programming Guide

Fulham Smartset Programming

The TPSB-100 SmartSet controller gives the user the power to set a number of parameters of compatible WorkHorse LED and HotSpot LED drivers. Fulham’s TPSB-100 is powered via a USB cable that can connect either to a PC or wall power with the included adapter. When used with a PC, Fulham’s SmartSet software provides additional programming ability.

TPSB-100 SmartSet 控制器可以允许用户设定多个匹配的WorkHorse系列 LED and HotSpot系列 LED驱动器。TPSB-100 使用USB电缆实现供电，可灵活连接PC的USB端口或使用随附适配器接入墙壁电源插座。可编程线束可以简单连接LED驱动器的端子，来直接传输所需的配置参数。当连接PC时，Fulham 的SmartSet软件提供图形化界面，支持高级编程功能。

For additional information, please see the links below:

White paper overview of the SmartSet programming system (less than 1MB)

Download TPSB-100 SmartSet Controller User Manual (less than 1MB)

Download Programming Instructions and Design Guide (less than 1MB)

Download SmartSet software (5MB)System requirements:1GHz CPU, 512MB RAM, USB Port 2.0/3.0.Supported Windows OS versions:Windows XP SP2 and above (32 & 64 bit), Windows Vista/Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)

SmartSet software installation instructions

Specs and Literature

Brochure

• Download HotSpot Constant Power Programmable Driver brochure (1MB)

• View Online

Spec Sheets and Installation Instructions

FHSCP-UNV-10P-L-SD and Batteries

• Spec Sheet

• Installation Instructions

• HotSpot Self Diagnostic instructions